| Configure | Unit | TV-600 | ||
Mark Allow Regulation Grid | Journey | Three-axis travel X/Y/Z | mm | 600/400/320 |
| Spindle nose to table | mm | 150-470 | ||
| Spindle center to cylinder surface | mm | 425 | ||
| Workbench | working desk size | mm | 700x420 | |
| T-slot | mm | 14x3x 125 | ||
| Workbench load | kg | 280 | ||
| Spindle unit | Spindle transmission mode | - | Direct | |
| Spindle speed (standard) | rpm | 20000 | ||
| Spindle speed (optional) | rpm | 12000/15000/24000 | ||
| Spindle taper hole | - | BT-30 | ||
| Spindle bearing lubrication method | - | Grease lubrication | ||
| Spindle cooling method | - | Air-cooled/Oil-cooled | ||
| Three axis feed | Three-axis rail design | - | ||
| Three-axis track width | mm | 30/30/30 | ||
| Diameter of triaxial screw | mm | Φ28/Φ28/Φ32 | ||
| Three-axis screw pitch | mm | P=12/16 | ||
| Three-axis rapid traverse speed | m/min | 48/48/48 | ||
| Precision JIS B6228/6339 | 3-axis cutting rate | mm/min | 30000 | |
| Three-axis positioning accuracy | mm | ±0.005 | ||
| Three-axis repeatability | mm | ±0.003 | ||
| Basic parameters | Base integrated rear chip removal | Backflush | ||
| Machine height | mm | 2236 ±10（When the column height is not specified） | ||
| Floor space (length X width) | mm | 2050x 1800 | ||
| Machine weight | kg | 3000 | ||
| Automatic tool changer (standard) | Tool magazine capacity | pcs | 16/21 | |
| Tool change method | - | Clip Arm / Flying Saucer | ||
| Shank Type | - | BT-30 | ||
| Tool diameter (full tool / adjacent empty tool) | mm | Φ60/Φ80 | ||
| Tool length | mm | 200 | ||
| Tool selection method | - | Random | ||
| Tool weight | kgs | 2kg/把（Gross weight 15kg）;3kg/把（Gross weight22kg） | ||
| Tool change time (tool to tool) | sec | 1.4（2kg/Set value） | ||
